Humanized Biomass Pellet Machine Wood Pellet Mill With 1 To 1.5 Ton
Make all kinds of Agriculture and animal husbandry material into
pellet ,such as : straw, sawdust, rice husk, palm shell, palm,
bamboo shavings and bagasse material.
420 Wood / Sawdust Pellet Mill : Single machine output from 1 to
1.5 tons /h of pure sawdust pellets ,1.8 tons /h of straw pellets .
1, special feed mechanism which reliable feed evenly, specially
designed for pressing all kinds of wood sawdust and straw.
2, with high precision gear transmission, the output which use gear
is 20% higher than before.
3, using Japanese NSK high quality bearing, ensure transmission
efficient, stable and reliable;
4, adopt international advanced equipment and technology of the
processing and manufacturing of stainless steel ring die, long
service life, the grain is smooth and high quality;
5, Use the international advanced level Compensation type
snake-like spring coupling,has the advantages of novel structure,
compact, safe, low noise, low malfunction, and low failure
◆It is widely used for pelletizing of light substances, such as
wood chips, sawdust, straw, pasture, chrysanthemum, palm leaf and
◆The feeder's especial structure makes materials conveyed evenly.
It is specially designed for pelletizing of light substances with
the density of 0.15-0.65g/cm3;
◆ Feeder,conditioner and chute are made of stainless steel with
long service life;
◆ It is with magnet and over load protection system which can
protect machine well during production;
◆ It makes gear directly-connecting as the driver,and is with
quick-release die fixed by clamps,which can increase the output by
15% more than the same type machine with belt-convey;
◆The bearings and oil seals in the main drivers are imported from
Japan to ensure highly-efficient,stability and credibility.
Main Technical Parameters:
Application of agriculture and forestry waste as raw materials,
after processing can be made into all kinds of molding of a new
type of clean fuel combustion directly.
Biomass pellet Fuel: also called straw briquette Fuel (Biomass
Moulding arg, hereinafter referred to as "BMF") is the application
of agriculture and forestry waste (such as straw, sawdust, bagasse
and rice chaff, etc.) as raw material, after crushing, mixing,
extrusion, drying process etc, made from a variety of molding, such
as granular, can a new type of clean Fuel combustion directly.
It can realize ecological "zero" greenhouse gas CO2 emissions: BMF
fixed energy comes from the nature of photosynthesis in plants on
the solar energy and its combustion emissions of CO2 from the
growth of CO2 absorption of the nature, therefore, BMF has the
characteristics of the ecological "zero" emissions of CO2.
Low carbon energy: BMF combustion is given priority to with
volatile flux, the fixed carbon content only about 15%, so it is a
typical low carbon fuel. To reduce SO2 emissions: BMF sulfur
content is lower than diesel, is only 0.05%, do not need to set the
desulfurization device can realize the SO2 emissions.
Dust emission standard: BMF ash is 1.81%, is coal based fuels
around 1/10, simple to set up the dust removal device can realize
the dust emission standard
Reduce NOx generation: BMF low nitrogen content, high oxygen
content, burning temperature is low, can reduce the formation of
BMF derived from agriculture and forestry waste, and biomass
alcohol-based fuel is raw material with grain and oil crops as raw
materials for biomass diesel, won't produce "compete for food with
people" and "fight" with people's social problems, distributing a
wide variety of raw materials, the content is large, the cost is
low, the cycle of growth, as ever, an inexhaustible, circular
economy is a typical project.
Safe and convenient: BMF density, small volume, solid forming,
sealed packaging, transport storage safe and convenient.