BWL NWL HWL PWL Double Tube Wireline Head Assembly Core Barrel
Wire-line core drilling equipment is very commonly used for mineral
exploration for deep holes because of practical usage.
Sinocoredrill products are manufactured by using high quality raw
materials and designed according to DCDMA, wire-line –Q standard.
We offers to clients following models of wire-line core barrel
compatible with - Q Wire-line Standard Drilling Equipment;
Wire-line Double Tube Core Barrel; B, N, H, P sizes;
Wire-line Triple Tube Core Barrel; B-3, N-3, H-3, P-3 sizes;
Wire-line Core Barrel T2-76, T2-86, T2-101… T series;
All spare parts and conversion kits can be supplied as a kit or
separate in order to reduce cost of coring system.
Wire line core barrels are used when coring to greater depths,
mainly because they eliminate the need to couple and uncouple the
rod string each time the core is retrieved. An overshot device is
dropped on a cable and directly couples onto the inner tube
assembly, allowing fast retrieval of the core after each core run.
Available in DCDMA sizes B, N, H. and P.
|Specification||Core Barrel Type|
|B W/L||N W/L||H W/L||P W/L|
|Hole Diameter (mm)||59.9||75.7||96.3||122.8|
|Core Diameter (mm)||36.4||47.6||63.5||85.0|
|Kerf / Crown Thickness (mm)||11.6||13.9||16.2||18.5|
|Cutting Area (cm2)||18.3||27.2||41.1||61.7|
|Hole Area (cm2)||28.3||45.0||72.8||118.5|
|Cutting Area as % of Hole Area||64%||60%||56%||52%|
|Core Area (cm2)||10.3||17.8||31.7||56.8|
|Recommended Drill Rod||B W/L||N W/L||H W/L||P W/L|
|Conversion to triple tube possible||Yes||Yes||Yes||Yes|